Skip to content
STEELTOETOOLS

Safety Permits & Forms

18 free generators

Fill out a permit or form online, watch the document build itself, then print it or save it as a PDF. Templates follow OSHA standards and NFPA/ANSI references; a competent person adapts them to your site. Everything runs in your browser.

Inspections & Checklists

Aerial Lift & Scissor Lift Inspection Form Generator
The daily control test 1926.453(b)(2)(i) requires — 45 checkpoints, boom lifts and scissor lifts, printable Letter.
Daily Excavation Inspection Form Generator
The competent person's daily trench inspection under 1926.651(k)(1) — 24 checkpoints, corrective actions, sign-off.
Forklift Daily Inspection Checklist Generator
The pre-shift examination 1910.178(q)(7) requires — key-off and engine-on checks, printed or saved as a PDF.
Harness & Lanyard Inspection Form Generator
The pre-use inspection 1926.502(d)(21) requires — 34 checkpoints, equipment log, removal-from-service record.
Ladder Inspection Checklist Generator
The competent person's ladder inspection — 33 checkpoints, ladder register, tag-out record, printable Letter.
Rigging Gear Inspection Form Generator
Sling and hardware inspection under 1926.251 and 1910.184 — 43 removal-from-service checkpoints, gear log, sign-off.
Scaffold Inspection Checklist Generator
The competent person's before-shift scaffold inspection — 57 checkpoints, supported, mobile and suspension.

Permits

Confined Space Entry Permit Generator
Every element 1910.146(f) requires — hazards, isolation, atmospheric tests, attendant, rescue — filled out in your browser, printed or saved as a PDF.
Excavation & Trenching Permit Generator
811 locates, soil type, protective system, egress, atmosphere, competent person sign-off — one printable permit.
Fire Watch Log Generator
The record the hot work permit does not keep: who watched, what they saw, and what time the watch could be released.
Hot Work Permit Generator
Fill it out online, print it or save it as a PDF. 35 ft clearance checklist, fire watch, sign-off — OSHA and NFPA 51B.

Procedures

Heat Illness Prevention Plan Generator
A printable written heat plan that answers the eleven questions an OSHA compliance officer asks about your heat program.
Lockout/Tagout Procedure Generator (Machine-Specific)
Machine-specific energy control procedure per 1910.147(c)(4) — energy sources, isolation points, sequence, verification.

Hazard Analysis

JHA / JSA Builder (Job Hazard Analysis)
Steps, hazard types, consequences and controls, laid out the way OSHA 3071 describes a JHA.
PPE Hazard Assessment Form (1910.132)
The written record 1910.132(d)(2) requires — workplace, evaluator, date, hazards by body part, PPE selected.
Pre-Task Plan / Daily Safety Huddle Form
Today's tasks, their hazards and controls, PPE, permits and crew sign-on — one page, filled out in a minute.

Industrial Hygiene

Silica Written Exposure Control Plan Generator
The four elements 1926.1153(g)(1) requires — tasks, controls, housekeeping and access — in one printable plan.

Meetings & Training

Toolbox Talk Sign-In Sheet Generator
Topic, date, presenter, jobsite and signature lines — printed clean or saved as a PDF.