Confined Space Entry Practice Test
Twenty-five questions on permit-required confined spaces, with every answer traced to the paragraph it comes from: the three-part confined space test, the four characteristics that make a space permit-required, atmospheric limits and test order, the permit system, the duties of entrants, attendants and entry supervisors, and rescue. Where the construction rule in 29 CFR 1926 Subpart AA differs from the general industry rule in 1910.146, the question says so. Your employer's own training and permit space program remain required; this test only helps you review.
Not OSHA-authorized training. SteelToeTools is not affiliated with, endorsed by, or authorized by OSHA or the U.S. Department of Labor. This free educational content does not satisfy any OSHA or other regulatory training requirement, and no card, certificate, or credential is issued. Only OSHA-authorized trainers can deliver OSHA Outreach Training (10-Hour and 30-Hour) and issue DOL cards. Always follow your employer's training program and applicable federal, state, and local requirements.
Frequently asked questions
Sources & references
- 29 CFR 1910.146 — Permit-required confined spaces (general industry)
- 29 CFR 1910.146 App. A — Permit-required confined space decision flow chart
- 29 CFR 1926.1201 — Scope of Subpart AA and its exceptions
- 29 CFR 1926.1202 — Definitions (construction confined spaces)
- 29 CFR 1926.1203 — General requirements (construction confined spaces)
- OSHA — Confined Spaces safety and health topics page
Content checked against these sources — last reviewed August 28, 2026.